88197 SE Adjustable Self Belay Sling Pro slate-oasis 115 CM Edelrid 881971156272

Robust sling anchor and lanyard made from polyester with moveable abrasion protector and sewn terminations.

Contattaci per disponibilità

Spare rope for the OMBILIX ADJUST.

Contattaci per disponibilità

The cambium saver was developed especially for tree care use. It is a mobile sling anchor and belay anchor for climbing ropes

Contattaci per disponibilità

Small, redundancy rigging plate made of robust stainless steel for rescue operations.

Contattaci per disponibilità

Kernmantle lanyard for securing, positioning and progression in work safety, aid climbing or canyoning (according to EN 354). Made from DYNAMITE dynamic rope to absorb energy. The SWITCH PRO is connected to the harness with a knot.

Contattaci per disponibilità

Adjustable lanyard with a 12 mm kernmantel rope for work positioning at height (in accordance with EN 358). The length of the OMBILIX ADJUST can be quickly and easily adjusted using a rope clamp.

Contattaci per disponibilità

The KAA is a prefabricated haul system for tensioning systems or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilization, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the positioning, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91 %. The KAA is packaged compactly but ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever.

Contattaci per disponibilità

Sewn round slings made from polyester with moveable abrasion protector for positioning an anchor point.

Contattaci per disponibilità

8 mm diameter friction hitch rope—bites even better, especially on thinner ropes. The sheath is reinforced by a high proportion of aramid. The TIBOR is available as a stitched round sling or with two certified terminations.

Contattaci per disponibilità

This work position lanyard has a steel core covered with a sheath, designed for working near sharp-edged objects or working with sharp tools (e.g. chainsaw).

Contattaci per disponibilità

The cambium saver was developed especially for tree care use. It is a mobile sling anchor and belay anchor for climbing ropes

Contattaci per disponibilità

Spare tube for the KAA haul system.

Contattaci per disponibilità

Certified friction knot sling with low elongation, especially cut and abrasion resistant and pleasingly non-slip. The friction knot rope with a kernmantle construction and aramid in the sheath, as well as in the core, is fitted with two sewn termination eyelets.

Contattaci per disponibilità

The KAA is a prefabricated haul system for tensioning systems or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilization, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the positioning, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91 %. The KAA is packaged compactly but ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever.

Contattaci per disponibilità

Robust lanyard and sling anchor with a 6 mm steel core. For creating anchor points on sharp-edged structures as well as for back-up safety when used in restraint systems and for workplace stabilisation.

Contattaci per disponibilità

Robust sling anchor and lanyard made from polyester with moveable abrasion protector and sewn terminations.

Contattaci per disponibilità