84013 Spare Lever Kaa oasis Edelrid 840130001380

The KAA is a prefabricated haul system for tensioning systems or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilization, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the positioning, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91 %. The KAA is packaged compactly but ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever.

Contattaci per disponibilità

Sewn round sling with integrated aluminum ring for use as a multifunctional sling anchor and as a spare part for the ADJUSTABLE CAMBIUM SAVER. Made of friction knot rope with a kernmantle construction and aramid in the sheath, as well as in the core, for increased cut and abrasion resistance.}

Contattaci per disponibilità

A multifunctional, length-adjustable lanyard certified to EN 354, EN 566 and EN 795–B. The MATCH SLING makes an ideal sling anchor for attachment points of various sizes. The individually adjustable design makes it possible to precisely install belay anchors and interim anchors for rope routes. It furthermore acts as an alternative to stretcher support straps with an impressively light and compact design. Used as an auxiliary block and tackle system during a ‘pick-off rescue’, the MATCH SLING can also make a great companion in emergencies. 

Contattaci per disponibilità

The cambium saver was developed especially for tree care use. It is a mobile sling anchor and belay anchor for climbing ropes

Contattaci per disponibilità

8 mm diameter friction hitch rope—bites even better, especially on thinner ropes. The sheath is reinforced by a high proportion of aramid. The TIBOR is available as a stitched round sling or with two certified terminations.

Contattaci per disponibilità

Adjustable lanyard with a 12 mm kernmantel rope for work positioning at height (in accordance with EN 358). The length of the OMBILIX ADJUST can be quickly and easily adjusted using a rope clamp.

Contattaci per disponibilità

Spare rope for the OMBILIX ADJUST.

Contattaci per disponibilità

Adjustable lanyard with a 12 mm kernmantel rope for work positioning at height (in accordance with EN 358). The length of the OMBILIX ADJUST can be quickly and easily adjusted using a rope clamp.

Contattaci per disponibilità

Spare tube for the KAA haul system.

Contattaci per disponibilità

The cambium saver was developed especially for tree care use. It is a mobile sling anchor and belay anchor for climbing ropes

Contattaci per disponibilità

Spare tube for the KAA haul system.

Contattaci per disponibilità

Spare tube for the KAA haul system.

Contattaci per disponibilità

Robust sling anchor and lanyard made from polyester with moveable abrasion protector. Thanks to a sewn termination at one end and an aluminum connecting ring at the other, the lanyard can also be threaded as a girth hitch. The connecting ring also allows unrestricted use of the central anchor point, even under load.

Contattaci per disponibilità

I-lanyard with elasticated arm and DSG 2500 GIANT palm carabiner. The carabiner’s simple handling and large gate opening make the set particularly ideal for uses in the field of scaffolding. The integrated shock absorber enables a high maximum load of 140 kg. The individual carabiner and the SHOCKSTOP-LITE-I 140 GIANT as a system have been edge tested.

Contattaci per disponibilità

The KAA is a prefabricated haul system for tensioning systems or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilization, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the positioning, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91 %. The KAA is packaged compactly but ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever.

Contattaci per disponibilità

Y-lanyard for self-belaying and work positioning made from energy-absorbing DYNAMITE dynamic rope. The two arms permit variable, situation-dependent use.

Contattaci per disponibilità