88201 Ancora Open slate 150 CM Edelrid 882011506630

Spare rope for the OMBILIX ADJUST.

Contattaci per disponibilità

Y-lanyard with a special tie-back function for greater flexibility. Integrated intermediate rings make it possible to wrap the upper part of the arms around wider or larger elements. This part is fitted with an additional abrasion protector. The shock absorber is designed for a high load capacity of up to 140 kg. The individual carabiners and the SHOCKSTOP-Y 140 TIE-BACK GIANT ANSI as a system have been edge tested. The integrated swivel carabiner for harness attachment prevents the arms from twisting during use.

Contattaci per disponibilità

Robust lanyard and sling anchor with a 6 mm steel core. For creating anchor points on sharp-edged structures as well as for back-up safety when used in restraint systems and for workplace stabilisation.

Contattaci per disponibilità

Adjustable lanyard with a 12 mm kernmantel rope for work positioning at height (in accordance with EN 358). The length of the OMBILIX ADJUST can be quickly and easily adjusted using a rope clamp.

Contattaci per disponibilità

The KAA is a prefabricated haul system for tensioning systems or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilization, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the positioning, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91 %. The KAA is packaged compactly but ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever.

Contattaci per disponibilità

Spare rope for the OMBILIX ADJUST.

Contattaci per disponibilità

Y-lanyard for self-belaying and work positioning made from energy-absorbing DYNAMITE dynamic rope. The two arms permit variable, situation-dependent use.

Contattaci per disponibilità

8 mm diameter friction hitch rope—bites even better, especially on thinner ropes. The sheath is reinforced by a high proportion of aramid. The TIBOR is available as a stitched round sling or with two certified terminations.

Contattaci per disponibilità

Certified friction knot sling with low elongation, especially cut and abrasion resistant and pleasingly non-slip. The friction knot rope with a kernmantle construction and aramid in the sheath, as well as in the core, is fitted with two sewn termination eyelets.

Contattaci per disponibilità

Kernmantle lanyard for securing, positioning and progression in work safety, aid climbing or canyoning (according to EN 354). Made from DYNAMITE dynamic rope to absorb energy. The SWITCH PRO is connected to the harness with a knot.

Contattaci per disponibilità

Y-lanyard for self-belaying and work positioning made from energy-absorbing DYNAMITE dynamic rope. The two arms permit variable, situation-dependent use.

Contattaci per disponibilità

Sewn round slings made from polyester with moveable abrasion protector for positioning an anchor point.

Contattaci per disponibilità

Compact shock absorber for use in fall arrest systems that form part of personal fall protection equipment.

Contattaci per disponibilità

Light, compact I-lanyard with an elasticated arm and ONE TOUCH II palm carabiner for easy handling when self-belaying or for protection on work platforms, during rigging work as well as for connection to a lifeline. The integrated shock absorber is designed for a maximum load of 140 kg. The individual carabiner and the SHOCKSTOP-LITE-I 140 ONE TOUCH as a system have been edge tested.

Contattaci per disponibilità

With no unnecessary loose parts that can get lost, the ability to be opened and closed as often as users desire, and a design that makes it the lightest and most compact swivel in its class, the CUPID SWIVEL is a dream come true for any PPE system! The innovative integrated mechanical screw locking system enables the device to be repeatedly opened and closed without having to replace or manually secure screws, and reliably prevents the screw from opening of its own accord due to vibrations. The combination of a 12 mm opening width and the outward opening direction of the gate makes it easy to install rope terminals, slings, and metal components.

Contattaci per disponibilità

Spare hand lever for the KAA haul system.

Contattaci per disponibilità