88943 Master Rig II night Edelrid 889430000170

Y-lanyard with a special tie-back function for greater flexibility. Integrated intermediate rings make it possible to wrap the upper part of the arms around wider or larger elements. This part is fitted with an additional abrasion protector. The shock absorber is designed for a high load capacity of up to 140 kg. The individual carabiners and the SHOCKSTOP-Y 140 TIE-BACK GIANT ANSI as a system have been edge tested. The integrated swivel carabiner for harness attachment prevents the arms from twisting during use.

Contattaci per disponibilità

The cambium saver was developed especially for tree care use. It is a mobile sling anchor and belay anchor for climbing ropes

Contattaci per disponibilità

8 mm diameter friction hitch rope—bites even better, especially on thinner ropes. The sheath is reinforced by a high proportion of aramid. The TIBOR is available as a stitched round sling or with two certified terminations.

Contattaci per disponibilità

Sewn round slings made from polyester with moveable abrasion protector for positioning an anchor point.

Contattaci per disponibilità

This work position lanyard has a steel core covered with a sheath, designed for working near sharp-edged objects or working with sharp tools (e.g. chainsaw).

Contattaci per disponibilità

Lightweight aluminum ring for rope bridges, for example on tree-care harnesses but also for installing anchor points.

Contattaci per disponibilità

Certified friction knot sling with low elongation, especially cut and abrasion resistant and pleasingly non-slip. The friction knot rope with a kernmantle construction and aramid in the sheath, as well as in the core, is fitted with two sewn termination eyelets.

Contattaci per disponibilità

Lightweight aluminum ring for rope bridges, for example on tree-care harnesses but also for installing anchor points.

Contattaci per disponibilità

A multifunctional, length-adjustable lanyard certified to EN 354, EN 566 and EN 795–B. The MATCH SLING makes an ideal sling anchor for attachment points of various sizes. The individually adjustable design makes it possible to precisely install belay anchors and interim anchors for rope routes. It furthermore acts as an alternative to stretcher support straps with an impressively light and compact design. Used as an auxiliary block and tackle system during a ‘pick-off rescue’, the MATCH SLING can also make a great companion in emergencies. 

Contattaci per disponibilità

Y-lanyard for self-belaying and work positioning made from energy-absorbing DYNAMITE dynamic rope. The two arms permit variable, situation-dependent use.

Contattaci per disponibilità

Light, compact I-lanyard with an elasticated arm and ONE TOUCH II palm carabiner for easy handling when self-belaying or for protection on work platforms, during rigging work as well as for connection to a lifeline. The integrated shock absorber is designed for a maximum load of 140 kg. The individual carabiner and the SHOCKSTOP-LITE-I 140 ONE TOUCH as a system have been edge tested.

Contattaci per disponibilità

A Y-lanyard with elasticated arms, an integrated energy absorber, and large, light aluminum scaffold hooks. The set is ideal for use in the field of scaffolding as well as for securing to and moving along anchor points or structures, progressing on lifelines, or passing protection. The energy absorber is designed for a high load capacity of 140 kg. The integrated swivel carabiner for harness attachment prevents the arms from twisting. 

Contattaci per disponibilità

The KAA is a prefabricated haul system for tensioning systems or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilization, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the positioning, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91 %. The KAA is packaged compactly but ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever.

Contattaci per disponibilità

Small, lightweight aluminium rigging plate suitable for extending from one to three anchor points.

Contattaci per disponibilità

Robust lanyard and sling anchor with a 6 mm steel core. For creating anchor points on sharp-edged structures as well as for back-up safety when used in restraint systems and for workplace stabilisation.

Contattaci per disponibilità

A multifunctional, length-adjustable lanyard certified to EN 354, EN 566 and EN 795–B. The MATCH SLING makes an ideal sling anchor for attachment points of various sizes. The individually adjustable design makes it possible to precisely install belay anchors and interim anchors for rope routes. It furthermore acts as an alternative to stretcher support straps with an impressively light and compact design. Used as an auxiliary block and tackle system during a ‘pick-off rescue’, the MATCH SLING can also make a great companion in emergencies. 

Contattaci per disponibilità